Interordinal: Difference between revisions
m →Naming |
|||
| Line 24: | Line 24: | ||
||semisecond | ||semisecond | ||
||unison-inter-second | ||unison-inter-second | ||
||inframinor second | ||ultraunison<br/>inframinor second | ||
||''-'' | ||''-'' | ||
|- | |- | ||
| Line 54: | Line 54: | ||
||semifourteenth | ||semifourteenth | ||
||seventh-inter-octave | ||seventh-inter-octave | ||
||ultramajor seventh | ||ultramajor seventh<br/>infraoctave | ||
||''-'' | ||''-'' | ||
|} | |} | ||
Revision as of 19:25, 14 February 2026
Interordinals are interval categories halfway between adjacent ordinals, or interval classes, of the diatonic scale. For example, 250c is an interordinal because it falls between 200c (the 12edo major second) and 300c (the 12edo minor third). Interordinals may sometimes be called interseptimals; however, the term "interseptimal" also has certain other senses on this wiki.
There are usually considered to be four interordinal regions:
- semifourth (between major 2nd and minor 3rd)
- semisixth (between major 3rd and perfect 4th)
- semitenth (between perfect 5th and minor 6th)
- semitwelfth (between major 6th and minor 7th).
Sometimes the interizer/semisecond, and its octave-complement, the semifourteenth, are included. The interizer is defined as the interval that separates interordinals from adjacent diatonic ordinals; it is half of the diatonic small step.
19edo, 24edo, and 29edo are notable edos with a complete set of interordinals; the MOS scales manual (5L1s) and semiquartal (5L4s) in certain tunings have all four interordinal regions as well. Notable JI interordinals include 15/13 (247.7c, a semifourth) and 13/10 (454.2c, a semisixth); thus 10:13:15 is a fairly low-complexity JI triad with a semisixth.
Naming
There is no unified nomenclature for interordinal regions. The following table shows various ways to name interordinals:
| 24edo interval | "semi" names | "inter" names | "ultra"/"infra" | Greek-derived names |
|---|---|---|---|---|
| 50c, 1\24 | semisecond | unison-inter-second | ultraunison inframinor second |
- |
| 250c, 5\24 | semifourth | second-inter-third | ultramajor second inframinor third |
chthonic |
| 450c, 9\24 | semisixth | third-inter-fourth | ultramajor third infrafourth |
naiadic |
| 750c, 15\24 | semitenth | fifth-inter-sixth | ultrafifth inframinor sixth |
cocytic |
| 950c, 19\24 | semitwelfth | sixth-inter-seventh | ultramajor sixth inframinor seventh |
ouranic |
| 1150c, 23\24 | semifourteenth | seventh-inter-octave | ultramajor seventh infraoctave |
- |
Pythagorean-based interordinals
The Pythagorean-based sizes for interordinals are the logarithmic midpoints (mathematically, geometric means) of the corresponding Pythagorean diatonic intervals, hence being the canonical sizes for interordinals in some sense:
- interizer: sqrt(256/243) = 45.1c
- semifourth: sqrt(9/8 * 32/27) = sqrt(4/3) = 249.0c
- semisixth: sqrt(81/64 * 4/3) = sqrt(27/16) = 452.9c
- semitenth: sqrt(3/2 * 128/81) = sqrt(64/27) = 747.1c
- semitwelfth: sqrt(27/16 * 16/9) = sqrt(3/1) = 951.0c
- semifourteenth: sqrt(243/128 * 2/1) = sqrt(243/64) = 1154.9c
Some JI interordinals
- semifourth: 15/13; 22/19; 37/32
- semisixth: 13/10; 22/17; 31/24; 35/27
- semitenth: 17/11; 20/13; 37/24; 99/64
- semitwelfth: 19/11; 26/15; 45/26
